The Can-Am X3 is one of the most impressive UTV's on the market. From the suspension to the engine, the X3 is an awesome machine. As X3 owners, we are always trying to improve performance, handling, safety, style, and comfort of our machine which ultimately improves the experience of owning and driving our X3. We have always felt the X3 was lacking when it came to the feel, style, and comfort of the interior which is made up of over 10 plastic pieces that are assembled together like a puzzle. So we set out to create the ultimate driving experience by redesigning the interior to increase style, feel, functionality, and use of space for switches, GPS, and other electronics. Hundreds of hours were devoted to molding, shaping, test fitting, and creating the best fiberglass dash on the market. Whether you are racing Baja or going to the dunes, our dash can certainly improve your driving experience.
MAKE IT YOURS
We know everyone has a different configuration of switches, radios, buttons, and electronics they use in their X3 which is why we do not cut any holes in the dash so you can layout your dash how you want. However, we are happy to CNC cut aluminum bezels for your switches and accessories to mount in.
**Some bezels shown in the drawing are optional**
We understand many X3 owners have personalized their cars using wraps, paint, decals, with a variety of colors and designs which is why we send you the dash in a plain white gel coat and allow you to paint or wrap the dash how you want without the added charge of painting. However, if you would like the dash to be shipped to you already painted, we can do that too. Currently we are offering a gloss and matte black finish.
The black anodized aluminum center dash bezel can be CNC cut to accommodate your switches and accessories. This is a great option if you know what you will be installing in this section of your dash and do not want to cut the fiberglass to fit each switch or accessory. You will need to cut an open section in the dash for whatever you will be installing and the bezel will be riveted to the fiberglass. This is much easier than trying to cut each section of the fiberglass for a clean fit of radios, intercoms, switches, etc. If you select this option, we will contact you requesting information on what you will be installing so we can CNC cut to your specifications.
The black anodized aluminum center console bezel can be CNC cut to accommodate a variety of switches or accessories. This is a great option if you know what you will be installing in this section of your console and do not want to cut the fiberglass to fit each accessory. You will need to cut an open section in the console for whatever you will be installing and the bezel will be riveted to the fiberglass. This is much easier than trying to cut each section of the fiberglass for a clean fit of your accessories. The center console bezel will mount directly behind the shift gate. If you select this option, we will contact you requesting information on what you will be installing so we can CNC cut to your specifications.
The black anodized aluminum left rocker switch bezel can be CNC cut to accommodate 2, 3, or 4 rocker switches. This is a great option if you know what you will be installing in this section of your dash and do not want to cut the fiberglass to fit each switch. You will need to cut an open section in the dash for whatever you will be installing and the bezel will be riveted to the fiberglass. This is much easier than trying to cut each section of the fiberglass for a clean fit of your rocker switches. The left rocker switch bezel will mount in a similar position as the OEM headlight switch and knockout spaces. If you choose to the (4) switch bezel, you will have to remove or cut a slot in the lower plastic panel to fit the far left switch. The cut will be behind the dash and not visible.
That depends. We would like to say no but everyone has a different level of mechanical ability. If you have never turned a wrench on your X3, it will obviously be more difficult than for someone that has hands on experience working on their X3. Our step by step installation manual with detailed pictures is written to accommodate all mechanical skill levels. Removal of the OEM and installation of your new dash can be expected to take 3-4 hours but will vary based on what electronics you are also installing.
Yes, but it depends on the size of the speakers or accessories. You will just have to cut the fiberglass to accommodate whatever you plan on installing. However, depending on the size of the speakers, they may not sit flush on the dash because there is not very many flat surfaces on top of the dash.
Yes. We have incorporated an access lid that can be easily removed to access the fuse panel and brake reservoirs.
The space for an iPad/tablet can be used for anything. Feel free to add switches, stereo, radios, GPS units or any other accessory. If you are installing a Lowrance GPS unit, you will have to purchase their in dash mounting kit. If you do plan to use an iPad, the space will accommodate up to the 10.20" model iPad.
Unfortunately, we were unable to accommodate years 2017 to 2019 due to the size of gauge cluster Can-Am used during those years. For model years 2020 through 2022, Can-Am used 4 different gauge cluster variations and a couple of those were not able to work with this dash because of how the gauge cluster mounts.
No. The dash will arrive to you unpainted/primed in white gelcoat. Light sanding and prep can be expected prior to painting. However, we offer the option of having it professionally painted black and clear coated gloss using PPG products. If you would like another color, please contact us and we will have to quote you based on the color you would like.
Yes the dash will fit with an aftermarket cage. However, depending on the style and design of the cage, that will affect how the dash is installed. In some cases, the center dash section may need to be notched in order to fit over the grab bar. With the OEM cage, the dash can be installed through the front of the cage or through the side as there is enough clearance. The dash will also fit with a Can-Am windshield. Installing the dash with a custom windshield will depend on the design and how the windshield mounts.
No. We do not do any installs at our facility. However, you are welcome to pick up the dash once we let you know it is ready. We are located in Murrieta, CA.
No. We understand storage space is important but we will not be making a version with a glove box at this time. Look into door bags, shoulder bag, or overhead storage to make up for the loss of the very limited space provided by the OEM glove box.
There are a lot of gated shifters on the market and without doing testing on each one, it is hard for us to say if your gated shifter will work for sure. If you do have a gated shifter and would like to purchase, let us know and we will not cut out or install our shift gate. We would leave it to you to make the cutout to accommodate your specific shifter. This would also apply to aftermarket heaters or any other accessories that mount in the dash area. There is a substantial amount of space behind the dash so it would be relatively easy to cut holes in the dash for vents but without testing a specific system, we can not guarantee fitment.
Save it, sell it, or hang them in your garage. At the time of writing this, all the plastic removed is listed on eBay (individually) totaling over $400.